Data Recovery : Recover Data If Your Hard Drive Is Dead?

Read Time:2 Minute, 27 Second

You were working on your laptop when it suddenly stopped working and ostensibly refused to start? Your internal HDD or SSD Data Recovery storage medium may be dead, which for you may represent a considerable loss, especially if you do not have a backup. Of course, the fault can also be elsewhere. So how do you know if your hard drive is dead?

How do I know the status of my hard drive?

As much to tell you right away a hard drive or a USB key always ends up dying. This kind of incident is even quite common and can be the consequence of a software or hardware failure. How do you know which one is causing your problem?

Software failures :

Software failures are generally due to a malfunction of the operating system installed on the hardware or to human error. It can be accidental data loss, mistaken formatting, corrupted file system, virus attack, etc.

Software failures are usually manifested by:

The display of an error message when starting your laptop;
The inaccessibility of certain data;
A considerable loss of speed;
Corruption or encryption of certain data, etc.

Software failures are the most common and the least dangerous for your hardware and for your data, because the latter can be recovered using special software. However, this can take a mind-blowing time and you may never even get to the end of your troubles.

What to do if your hard drive is dead?

If your internal storage medium is dead, you have only one thing to do: entrust it to a technician, crossing your fingers so that he can recover the majority of your data. However, before panicking, you need to make sure that the problem is not elsewhere.

Sometimes we think we know that it is the internal storage medium that has failed when the latter is simply badly connected to the motherboard . Also, before calling a technician, remember to check the data and power cable connections. To do this, start by turning off your computer and then discharging it of all the static electricity it contains by holding down the power key for 30 seconds. Then remove the internal storage media and open the case to check that all the cables are securely connected.

If everything is OK with the connections, you can now restart your computer and see if the problem is solved. The failure of your storage medium can also be because the circuit board has broken. In this case, you can simply replace the card, but be aware that you risk losing all of your data.

However, we must not forget that a hard drive , whether internal or external, is a very sensitive component. This is why, in the event of a fault, it is recommended to entrust it to a technician. The latter has indeed professional tools and experience that allow him to know how to proceed to recover the data.